Home > All Products > Hydac >
Hydac 0030D005Y-V Feiliter Replacement Filter Element

Hydac 0030D005Y-V Feiliter Replacement Filter Element

Part# FLT-HYD-100972-L4-6MV

Upgrades for Hydac 0030D Series Pressure Elements

Replaces Hydac 0030D005Y-V hydraulic filter in form, fit, and function. Scroll down for additional specs

Direct replacement for Hydac 0030D005Y-V hydraulic filter in form, fit, and function.with ISO 9001:2015 Certified manufacturing for assured quality.High-performance Filter Element Replacement improves efficiency, keeps fluids cleaner, and ensures smoother operations. Proudly manufactured and sourced in the CHINA.

OD Top: 1.372"
OD Bottom: 1.372"
ID: 0.485"
Length: 3.66"
End Caps: Corrosion Resistant Steel
Center Tube: Corrosion Resistant Steel
Media: Microglass fiber media
Seal: Viton (Fluorocarbon)
Bypass Setting:
Collapse Rating: 3000 psid
Filtration Rating: Bx = 200 Bx[c] = 1000
Feiliter# : FLT-HYD-100972-L4-6MV

  • ISO 2941 Collapse & Burst Resistant
  • ISO 2942 Fabrication & Integrity Test
  • ISO 2943 Material Compatibility with Fluids
  • ISO 3724 Flow Fatigue Characteristics
  • ISO 3968 Pressure Drop vs. Flow Rate
  • ISO 16889 Multi-pass Performance Testing

Our Hydac 0030D005Y-V replacement hydraulic filter is a guaranteed direct replacement in form, fit, and function. This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter. Made in China.

Filtration Media for the Hydac 0030D005Y-V direct interchange

Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Certified manufacturing facility. An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized microglass media is used for fine filtration, just like the Hydac 0030D005Y-V hydraulic filter to be replaced. Our microglass filters use the optimal amount of media and pleats to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop.

Filter Collapse Pressure for the Hydac 0030D005Y-V cross reference

A filter collapse pressure of 3000 psid Collapse means that if the filter is completely clogged and the build up of pressure reaches or surpasses 3000 psid Collapse the filter may collapse and allow contamination downstream. Please use a satisfactory safety factor for the filter.

Hydac 0030D005Y-V Compatible Fluids

This filter is compatible with the following fluids but pressure drop will vary depending on viscosity and temperature:

  • Hydraulic Fluid and Machining Fluids

  • Diesel and other fuels

  • Lubricating Oils and Synthetic Lubricants

  • Turbine and Compressor Lube Oils … And many more fluids

Our hydraulic filter is indicated as a replacement for Hydac 0030D005Y-V and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.

Visit the links below for more helpful information.

You may also like…